I recommend the Bauer Products Motorhome Door Lock - Black # BA64FR.
If you remove your old latch you will see the cut out underneath is going to be smaller and this will still fit in its place.
However on the off chance that this is an oddball and the cut out is bigger you can source a sheet of aluminum from a local store and be able to cut it to size to fit and paint it to match the color of your door. view full answer...
The Roadmaster Reflex Steering Stabilizer part # RM62VR is a confirmed fit for your 2023 Fleetwood Flair 32N and would do a great job making the steering a little easier. This will prevent over steering and wander. view full answer...
I looked up your 2006 Fleetwood Flair 34F and was able to determine that your RV came with 19.5 inch diameter wheels. Which the part # WM8005 that you referenced is designed for 22-1/2 inch wheels so it's not the kit you'd need. Instead you'd want the # WM80092 which is for dually wheels that are between 16 and 19.5 inch diameter.
If you happen to have 22-1/2 inch diameter wheels though you'd need the # WM8005. view full answer...
The best replacement option we offer for a Atwood G6A-8E RV Water Heater is tankless, the Furrion RV Tankless Water Heater part # FR68SR. It won't be a direct replacement but still pretty easy nonetheless as they are very similar. That said, you won't have to worry about enlarging the cutout or anything like that, just switching over some fittings and wires is all. The tankless design means pretty much an endless supply of hot water which is a big improvement over the six gallon tank you'll... view full answer...
Dimensionally the Valterra valves part # T1014 and # T1015 are the same. If you wanted to remove one and install the other in place of it everything would match up. view full answer...
If your 2018 Fleetwood Flair 30 has 9 inch round jack feet then the correct SnapPad Jack Pads is part # SP54FR4. We don't have ability to look up what your RV has so if you run out and measure your feet and find they are 9 inches round this would be correct. If you have something different let me know and I'll help you pick out what you'd need. view full answer...
The Lippert # LC159041 will work with a towed RV like a bumper pull camper or fifth wheel, but due to the size and weight of the wheels/tires on a motorhome, it would not be a good choice.
For a heavy 19-1/2 inch wheel like what's on your Class A, I'd recommend the Roadmaster # RM-195225 which features a pass through receiver. The carrier pivots to the ground, which means you which makes loading and unloading the spare much easier. The carrier accommodates 16-24-1/2 wheels and is compatible... view full answer...
I looked up the length of your 2018 Fleetwood Flair LXE 31W and since it's right at 33-3/4 feet in overall length the Adco SFS AquaShed RV Cover part # 290-52205 would fit and work great since it fits up to 34 foot motorhomes. view full answer...
For your 2015 Fleedtwood Flair 26D which is built on a 16,000 lb Ford F-53 chassis the correct rear sway bar is the part # RM-1139-146. view full answer...
Go To Results